1542 W. Industrial Park St. Covina, CA 91722

Tires – Slicks

IMPORTANT! Click here for Tire Mounting & Inflation Safety Precautions

slick tires
480/400 x 8 Slick Tire, 2 ply, 4.6" Wide, 16.3" OD, part no. 7004-2
Part No. 7098, 5" Rain Slick
SIZE TIRE PLY WIDTH* OD* INNERTUBE

8-300 x 4

 7097  4 3.0" 7.8" 7128

9-350 x 4

7090 4 3.5" 8.0" 7128

410/350 x 4

7041 4 3.5"  10.5" 7130
11-400 x 5 7006 4 4.0" 10.0" 7131
340/300 x 5N 7045 4 2.5" 10.8" 7131
340/300 x 5 7042 4 3.5" 10.8" 7131
410/350 x 5 7043 4 3.5" 11.0" 7132
11-600 x 5 7093 4 6.25" 10.2" 7116
13-500 x 6 7065 4 4.4" 11.5" 7133
13-650 x 6 7066 4 6.0" 11.5" 7141
410/350 x 6 7044 4 12.6" 11.5" 7133
12-600 x 6 7017-2 2 6.0" 11.8" 7127
480/400 x 8R 7004-2 2 4.6" 16.3" 7121
18-950 x 8 7019 4 9.0" 15.5" 7120
21-12 x 8 7001 2 11.0" 21.0" 7120
N - Narrow           R - Round Profile     

*Tire Width & OD are nominal.

FUN KART SLICKS

We inventory a line of fun kart slicks in racing sizes. Made from
a harder, longer-lasting, more durable rubber compound than
racing tires, these slicks fit a variety of wheels and are available
for less. Included are two Rain Slicks.

SIZE TIRE PLY WIDTH* OD* INNERTUBE
10-450 x 5 7060 4 5.0" 9.5" 7139
11-600 x 5 7061 4 6.25" 10.2" 7116
11-710 x 5 7062 4 8.0" 10.2" 7116
10-450 x 5 (Rain) 7098 4  5.0"  9.5"  7139
11-600 x 5 (Rain) 7099 4  6.25"  10.2"  7116

 

CONCESSION KART SLICKS
SIZE TIRE PLY WIDTH* OD* INNERTUBE
11-360 x 5H 7094 4 3.6" 11.0" 7131
12-400 x 5H 7095 4 4.0" 12.0" 7132
11-600 x 5 7069 4 5.5" 10.75 7116
13-400 x 6H 7096 4 4.0" 12.0" 7133
H - Heavy Duty

TIRE MOUNTING & INFLATION
SAFETY PRECAUTIONS

warning-general-2 WARNING! warning-general-2
THESE ARE NOT AUTOMOTIVE WHEELS & TIRES.
EXTRA INFLATION PRECAUTIONS ARE REQUIRED!
  1. Inspect wheel for any service damage before mounting tire.
  2. Lubricate tire beads and wheel rims with approved tire lubricant.
  3.  Use regulated pressure with an extension hose and in-line gauge.
  4. Use safety glasses and a safety cage, or other containment device
    for the tire/wheel assembly. Do not expose any unprotected portion
    of your body to the tire/wheel assembly while inflating.
  5. Never pry against a cast aluminum or nylon wheel rim.
  6. Do not pop the tire bead onto the rim.
  7. Upon reaching 25 p.s.i. air pressure, if tire is not seated, stop, deflate
    completely, then disassemble and hand-seat the tire onto the rim
    before re-inflating the tire.